The Mystery of Puma Punku’s Precise Stonework

Puma punku is the name of a large temple complex located near Tiwanaku, in Bolivia, and is part of a larger archaeological site known as Tiahuanacu. The temple’s origin is a mystery, but based on carbon dating of organic material found on site, archeologists believe the complex may have been built by the Tiwanaku empire – one of the most important civilization prior to the Inca Empire – that flourished between 300 and 1000 AD.

The most intriguing thing about Puma punku is the stonework. Puma punku was a terraced earthen mound originally faced with megalithic blocks, each weighing several tens of tons. The red sandstone and andesite stones were cut in such a precise way that they fit perfectly into and lock with each other without using mortar. The technical finesse and precision displayed in these stone blocks is astounding. Not even a razor blade can slide between the rocks. Some of these blocks are finished to ‘machine’ quality and the holes drilled to perfection. This is supposed to have been achieved by a civilization that had no writing system and was ignorant of the existence of the wheel. Something doesn’t add up.

An article from Wikipedia describes the fantastic engineering involved in the temple’s construction.

In ᴀssembling the walls of Puma punku, each stone was finely cut to interlock with the surrounding stones and the blocks fit together like a puzzle, forming load-bearing joints without the use of mortar. One common engineering technique involves cutting the top of the lower stone at a certain angle, and placing another stone on top of it which was cut at the same angle. The precision with which these angles have been utilized to create flush joints is indicative of a highly sophisticated knowledge of stone-cutting and a thorough understanding of descriptive geometry. Many of the joints are so precise that not even a razor blade will fit between the stones. Much of the masonry is characterized by accurately cut rectilinear blocks of such uniformity that they could be interchanged for one another while maintaining a level surface and even joints. The blocks were so precisely cut as to suggest the possibility of prefabrication and mᴀss production, technologies far in advance of the Tiwanaku’s Inca successors hundreds of years later.

Some of the stones are in an unfinished state, showing some of the techniques used to shape them. They were initially pounded by stone hammers—which can still be found in numbers on local andesite quarries—, creating depressions, and then slowly ground and polished with flat stones and sand

The stones are of mammoth proportion. The largest of these blocks is 25.6 feet long, 17 feet wide and 3.5 feet thick, and is estimated to weigh 131 metric tons. Due to their size, the method by which they were transported to Puma punku has been another topic of interest since the temple’s discovery. Chemical analysis reveal the red sandstone blocks were transported up a steep incline from a quarry near Lake тιтicaca roughly 10 kilometers away. The smaller andesite blocks that were used for stone facing and carvings came from quarries within the Copacabana Peninsula about 90 kilometers away from across Lake тιтicaca.

The Mystery of Puma Punku’s Precise Stonework

Based on circumstantial evidences, it can be argued that Puma punku was never built by the Tiwanaku, but by a civilization that was more advanced. Perhaps the carbon dating results were wrong due to contamination of the samples, or that Puma punku was built by another civilization that came across the ocean, built the complex and left. Some believe that Puma punku couldn’t have been built without help from alien beings.

The complex is in complete ruins today with huge blocks of granite lying around on top of each other. The site appears to have been destroyed by an earthquake, perhaps accompanied by a tidal wave from Lake тιтicaca.

puma-punku-10

This block seems to get the most attention, as there is a perfect groove with identically spaced precision-cut 6mm holes drilled along the cut.

puma-punku-3

More drill holes in what was once a lintel, with extraordinary detail that is just still visible.

puma-punku-9

Stone block with a set of blind holes of complex shape.

puma-punku-1

.

puma-punku-4

The numerous H-shaped blocks all match each other with extreme precision and fit into each other like Lego blocks.

puma-punku-5

 

Related Posts

Unearthed Secrets: Scythian Woman’s Tomb Shocks Archaeologists in Siberia’s ‘Valley of the Kings’!

Polish-Russian Team Uncovers 2,500-Year-Old Burial Mound Archaeologists have uncovered an extraordinary find in the Touran-Uyuk Valley of northern Tuva, Russia, commonly known as the ‘Siberian Valley of…

Discovering the Treasures Concealed Inside Tutankhamun’s Tomb

A Journey Through Time: The Discovery of King Tut’s Tomb On November 4, 1922, the sands of Egypt revealed a secret that had been hidden for over…

Groundbreaking Discovery: 23,000-Year-Old Footprints Challenge Long-Held Theories About the Peopling of the Americas

Groundbreaking Discovery Rewrites the History of Humanity’s Arrival in North America A Mᴀssive Shift in Our Understanding Archaeologists have made a groundbreaking discovery that has the potential…

The Alexander Sarcophagus: A Window into Ancient Near Eastern Politics and Art

An Unexpected Discovery in Sidon In 1887, Ottoman archaeologist Osman Hamdi Bey made a remarkable find while excavating the Lebanese Kings’ Necropolis in Sidon. Among the ancient…

The Enigma of the One-Armed Miniature Mummies: An Archaeological Mystery

A Startling Discovery   In a remote, uncharted archaeological site, researchers have made a baffling discovery that has sent ripples through the scientific community. Nestled within small…

The Enigma of Spanish Stonehenge: A 7,000-Year-Old Marvel

Uncovering an Ancient Wonder In the heart of Spain’s Extremadura region lies a megalithic marvel that predates the Egyptian pyramids. The Dolmen of Guadalperal, affectionately known as…