The Mystery of Puma Punku’s Precise Stonework

Puma punku is the name of a large temple complex located near Tiwanaku, in Bolivia, and is part of a larger archaeological site known as Tiahuanacu. The temple’s origin is a mystery, but based on carbon dating of organic material found on site, archeologists believe the complex may have been built by the Tiwanaku empire – one of the most important civilization prior to the Inca Empire – that flourished between 300 and 1000 AD.

The most intriguing thing about Puma punku is the stonework. Puma punku was a terraced earthen mound originally faced with megalithic blocks, each weighing several tens of tons. The red sandstone and andesite stones were cut in such a precise way that they fit perfectly into and lock with each other without using mortar. The technical finesse and precision displayed in these stone blocks is astounding. Not even a razor blade can slide between the rocks. Some of these blocks are finished to ‘machine’ quality and the holes drilled to perfection. This is supposed to have been achieved by a civilization that had no writing system and was ignorant of the existence of the wheel. Something doesn’t add up.

An article from Wikipedia describes the fantastic engineering involved in the temple’s construction.

In ᴀssembling the walls of Puma punku, each stone was finely cut to interlock with the surrounding stones and the blocks fit together like a puzzle, forming load-bearing joints without the use of mortar. One common engineering technique involves cutting the top of the lower stone at a certain angle, and placing another stone on top of it which was cut at the same angle. The precision with which these angles have been utilized to create flush joints is indicative of a highly sophisticated knowledge of stone-cutting and a thorough understanding of descriptive geometry. Many of the joints are so precise that not even a razor blade will fit between the stones. Much of the masonry is characterized by accurately cut rectilinear blocks of such uniformity that they could be interchanged for one another while maintaining a level surface and even joints. The blocks were so precisely cut as to suggest the possibility of prefabrication and mᴀss production, technologies far in advance of the Tiwanaku’s Inca successors hundreds of years later.

Some of the stones are in an unfinished state, showing some of the techniques used to shape them. They were initially pounded by stone hammers—which can still be found in numbers on local andesite quarries—, creating depressions, and then slowly ground and polished with flat stones and sand

The stones are of mammoth proportion. The largest of these blocks is 25.6 feet long, 17 feet wide and 3.5 feet thick, and is estimated to weigh 131 metric tons. Due to their size, the method by which they were transported to Puma punku has been another topic of interest since the temple’s discovery. Chemical analysis reveal the red sandstone blocks were transported up a steep incline from a quarry near Lake тιтicaca roughly 10 kilometers away. The smaller andesite blocks that were used for stone facing and carvings came from quarries within the Copacabana Peninsula about 90 kilometers away from across Lake тιтicaca.

The Mystery of Puma Punku’s Precise Stonework

Based on circumstantial evidences, it can be argued that Puma punku was never built by the Tiwanaku, but by a civilization that was more advanced. Perhaps the carbon dating results were wrong due to contamination of the samples, or that Puma punku was built by another civilization that came across the ocean, built the complex and left. Some believe that Puma punku couldn’t have been built without help from alien beings.

The complex is in complete ruins today with huge blocks of granite lying around on top of each other. The site appears to have been destroyed by an earthquake, perhaps accompanied by a tidal wave from Lake тιтicaca.

puma-punku-10

This block seems to get the most attention, as there is a perfect groove with identically spaced precision-cut 6mm holes drilled along the cut.

puma-punku-3

More drill holes in what was once a lintel, with extraordinary detail that is just still visible.

puma-punku-9

Stone block with a set of blind holes of complex shape.

puma-punku-1

.

puma-punku-4

The numerous H-shaped blocks all match each other with extreme precision and fit into each other like Lego blocks.

puma-punku-5

 

Related Posts

Making the ᴅᴇᴀᴅ Speak: Scientists Plan to Recreate the Voice of Otzi the Iceman

Italian scientists are attempting to give Ötzi the Iceman a voice. By using CT scans of his throat and the tissue around his voice box, the researchers…

2,500-Year-Old Tattooed Ice Princess Wears Fur to Go on Public Display at Next New Moon

By The Siberian Times reporter An ancient mummy preserved by permafrost is dressed up for her debut 21st century appearance despite calls for solemn reburial from native peoples….

Boris Johnson’s Mummified Ancestor Died from Pathogen, Not the STD Syphilis

New research reveals Boris Johnson’s mummified Swiss ancestor did not die of syphilis, as has long been believed, but of an unknown pathogen. In 1787, at 68 years…

New Tomb Discovered in Turkey! (Video)

This amazing discovery would be incredible and historic enough just by virtue of the fact of its being located in Turkey and suggesting that Queen Neferтιтi fled…

Scientists Solve the Mystery of the Alpine Mummy

For centuries, the unusually well-preserved body of an 18th-century clergyman has been the subject of local legends, speculation, and mystery. According to local lore, the body of…

Incan ‘princess’ mummy aged 8 ‘STOLEN from tomb’ 200 years ago finally laid to rest – but experts can’t crack mystery of her true idenтιтy

A RARE well-preserved mummy of a young Incan girl is being returned to its native homeland of Bolivia. The 500-year-old mummy nicknamed ‘Princess’ is notable for having…